Product
Soft foam (Tiger Soft Foam)-Korea
Product description:
Tiger Soft Foam is immediately usableone-componentpolyurethane type softfoam. This product has elasticity so good that it provides high sound proofing effect and performance. Especially, its outstanding elastic recovery power allows maintaining the performance even after longtime shock.
Capacity:
750ml
Use:
· Filling, damp-proofing, and dew condensation prevention in various gaps
· Reduce noise in vibration areas
· ALC and concrete joint sealing
· Joints in assembling construction and to bindplywood and other finishing materials
· Other fixing, jointing, insulation, and soundproofing
Product Description:
Tiger Soft-foam gun is a one-component, self-expanding, ready to use polyurethane foam. The foam is very elastic and has a very high Acoustic Rating and Thermal Insulation value.
Usage:
• Good applicability in expanding joints.
• Vibrating constructions
• Use as fixing foam while minimizing noise transmission
• Impact and shock damping
• Sealing of window- and doorframes
• Filling of cavities
• Sealing of all openings in roof constructions
• Creation of a soundproof screen
• Connecting of insulation materials and roof constructions
• Application of a soundproofing layer on motors
• Improving thermal isolation in cooling/heating systems
• Connecting of insulation materials and roof constructions
• Application of a soundproofing layer on motors
• Improving thermal isolation in cooling/heating system
Features:
– Very high elastic recovery
– Copes with extreme mechanical movement without cracking
– Excellent adhesion on most substrates (except Teflon, PE and PP)
– High thermal and acoustical insulation performance
– Very good filling capacities
– Excellent stability (no shrink or post expansion)
– Very precise application due to the foam applicator gun system
– Low expansion
– Good compressibility
PackIng:
1 Can = 750ml, 1 Box = 15 Can
Application Methods:
• Shake the aerosol can for at least 20 seconds.
• Fit the gun on the adapter. Moisten surfaces with a water sprayer prior to application to have the optimal performance to elasticity, noise reduction and cellular structure .
• Fill joints and cavities for 65 %, as the foam will continue to expand slightly.
• Repeat shaking regularly during application. If you have to work in layers repeat moistening after each layer.
• Fresh foam can be removed using Foam cleaner or acetone.
• Cured foam can only be removed mechanically.
• Working temperature 5°C to 35°C. (20°C-25°C recommended). Due to the flexibility of the product, it is recommended to use a sharp knife to cut the foam.
Storage:
• Store in shaded dry conditions between +10℃ and +25℃. Store Canisters Upright.
Property:
Base Poly Urethane
•Consistency ……………………………. Stable Foam
•Curing System ……………………………. Moisture Cure
•Skin Formation ……………………………. Ca. 6 min at 20℃/60% R.H
•Curing Rate ……………………………. Ca. for a 30mm bead, 1 hour at 20℃/60% R.H
•Specific Gravity ……………………………. Ca. 25kg/m3(extruded, fully cured)
•Temperature Resisitance ………………. -40°C ~ +90°C (cured)
•Shear Strength ……………………………. 3.0 N /cm2
•Elastic Recovery ………………………….. Until 92% (75% compressed)* Values may change slightly due to temperature, humidity, surface and way of applications
•Consistency ……………………………. Stable Foam
•Curing System ……………………………. Moisture Cure
•Skin Formation ……………………………. Ca. 6 min at 20℃/60% R.H
•Curing Rate ……………………………. Ca. for a 30mm bead, 1 hour at 20℃/60% R.H
•Specific Gravity ……………………………. Ca. 25kg/m3(extruded, fully cured)
•Temperature Resisitance ………………. -40°C ~ +90°C (cured)
•Shear Strength ……………………………. 3.0 N /cm2
•Elastic Recovery ………………………….. Until 92% (75% compressed)* Values may change slightly due to temperature, humidity, surface and way of applications