Product
Easy bond for ALC (Tiger Easy Bond For Masonry)
Product description:
Tiger Easy Bond masonry adhesive is foam type product suitable for light brick construction.
Capacity:
750ml
Use:
· Adhesion of bricks (ALC, etc.), natural stone, and similarconstruction materials
· Adhesion of Styrofoam (EPS, XPS)
· Adhesion of PIR and PUR boards
Product description:
Tiger Easy Bond for Masonry Adhesive is a rapid curing PU foam adhesive developed specifically for the installation of brick, stone, block and a range of other construction materials.
Use:
– Ideal for bonding and setting of Brickworks, Breeze Blocks, Natural Stone, Aerated Concrete and Granite etc.
– No mixing, no water, no power, no Mess, no waste: No need to spend time mixing sand and cement.
– It takes seconds to apply, and sets within minutes. This is real alternative to mortar.
– No mixing, no water, no power, no Mess, no waste: No need to spend time mixing sand and cement.
– It takes seconds to apply, and sets within minutes. This is real alternative to mortar.
Feature:
– easy of use
– strong bonding
– good adhesion on many surfaces
– able to apply at low temperatures
– immediate use, no mixing required
– no water or electricity required
– easy of use
– strong bonding
– good adhesion on many surfaces
– able to apply at low temperatures
– immediate use, no mixing required
– no water or electricity required
Product information:
– Packaging: 750ml canister(15 cans per box)
– Store in shaded dry conditions between +10℃ and +25℃
– Canisters must be stored upright
– Packaging: 750ml canister(15 cans per box)
– Store in shaded dry conditions between +10℃ and +25℃
– Canisters must be stored upright
Properties:
Base Polyurethane
Curing System ………………………… Moisture curing
Tack Free Time………………………… 8 min at 20℃/50% R.H
Full Cure Time ………………………… Ca. 24 hour at 20℃/50% R.H
Temperature Resistance ………….. -40°C ~ 100°C (cured)
Coverage(1 can) ……………………… Ca. 28 pcs of 150T ALC blocks applied in 2 bond lines
Compressive Strength ……………… Ca. 9.0N / ㎟(Korea Testing & Research Institute)
Base Polyurethane
Curing System ………………………… Moisture curing
Tack Free Time………………………… 8 min at 20℃/50% R.H
Full Cure Time ………………………… Ca. 24 hour at 20℃/50% R.H
Temperature Resistance ………….. -40°C ~ 100°C (cured)
Coverage(1 can) ……………………… Ca. 28 pcs of 150T ALC blocks applied in 2 bond lines
Compressive Strength ……………… Ca. 9.0N / ㎟(Korea Testing & Research Institute)
Directions for use:
– To begin, screw the canister firmly onto the applicator gun. Shake the canister vigorously prior to use at least 20 times.
– Extrude the foam carefully by applying pressure on the trigger. Shake canister regularly during the application.
– Apply the bead along the horizontal and vertical sections to be bonded
– TIGER Easy Bond for Masonry adhesive cures within 10 -15 minutes, and is fully load bearing within 24 hours.
– Extrude the foam carefully by applying pressure on the trigger. Shake canister regularly during the application.
– Apply the bead along the horizontal and vertical sections to be bonded
– TIGER Easy Bond for Masonry adhesive cures within 10 -15 minutes, and is fully load bearing within 24 hours.
