Product
Easy bond (Tiger Easy Bond)-Korea
Product description:
Tiger Easy Bond is one-component polyurethane foamtype multipurpose adhesive, and eco-friendly product that does not use a solvent differ from existing harmful acetic vinyl resin (methanol) based adhesives. It is localized product from the goods commonly used in advanced countries including European countries.
Capacity:
800ml
Use:
· Polyurethane-based one-component urethanefoam type (Can)
· Adhesive for various insulation materials including Styrofoam, Isopink, and hard urethane boards
· Very excellent constructability
· Show even adhesivestrength throughout the applied surface
DESCRIPTION:
Tiger Easy Bond is a ready-to-use, one component, self-expanding polyurethane adhesive for bonding of insulation panels and plasterboard in building and construction.
Tiger Easy Bond is a ready-to-use, one component, self-expanding polyurethane adhesive for bonding of insulation panels and plasterboard in building and construction.
USES:
– Bonding of various types of insulation panels onto roofs, walls and façades.
– Bonding of decorative elements in facade applications.
– Filling of cavities between insulation panels.
– Tiger Easy Bond is compatible with many common substrates including masonry, concrete, timber and metal.
– Bonding of various types of insulation panels onto roofs, walls and façades.
– Bonding of decorative elements in facade applications.
– Filling of cavities between insulation panels.
– Tiger Easy Bond is compatible with many common substrates including masonry, concrete, timber and metal.
FEATURES:
– An easy to use alternative to mortars and dry wall adhesives
– Ideal for bonding plasterboard, insulation and EPS panels
– Solvent-free: Environment-Friendly Materials
PRODUCT INFORMATION:
– Store in shaded dry conditions between +10℃ and +25℃.
– Canisters must be stored upright.
– Packaging: 800ml canister(15 cans per box)
– An easy to use alternative to mortars and dry wall adhesives
– Ideal for bonding plasterboard, insulation and EPS panels
– Solvent-free: Environment-Friendly Materials
PRODUCT INFORMATION:
– Store in shaded dry conditions between +10℃ and +25℃.
– Canisters must be stored upright.
– Packaging: 800ml canister(15 cans per box)
TECHNICAL INFORMATION:
Base Polyurethane
Consistency …………………………………… Stable foam
Curing system …………………………………. Moisture-cure
Tack free time ………………………………….. 7 mins at 20℃/60% R.H.
Adhesive rate ………………………………….. From 1 hour at 20℃/60% R.H.
Specific gravity ………………………………… 19 kg/m³ (extruded)
Temperature Resistance ………………….. -40°C ~ 100°C (cured)
Coverage (1 Can) …………………………… about 13㎡ (30mm thickness)
Bond Strength …………………………………. about 0.012 N / ㎟ ( EPS & WOOD)
Thermal Conductivity ……………………….. 0.030 W/(m•K)
Base Polyurethane
Consistency …………………………………… Stable foam
Curing system …………………………………. Moisture-cure
Tack free time ………………………………….. 7 mins at 20℃/60% R.H.
Adhesive rate ………………………………….. From 1 hour at 20℃/60% R.H.
Specific gravity ………………………………… 19 kg/m³ (extruded)
Temperature Resistance ………………….. -40°C ~ 100°C (cured)
Coverage (1 Can) …………………………… about 13㎡ (30mm thickness)
Bond Strength …………………………………. about 0.012 N / ㎟ ( EPS & WOOD)
Thermal Conductivity ……………………….. 0.030 W/(m•K)
DIRECTIONS FOR USE:
• Shake the canister thoroughly for at least 20 times. Remove the protective lid and screw onto the PU foam gun.
• For internal applications: Starting at the middle of the panel, apply a bead of Tiger Easy Bond across the full width of the board or panel and repeat every 300 mm.
• For external applications (EIFS): Apply a bead of Tiger Easy Bond around the perimeter of the surface to be bonded. Then across the full width of the board or panel at 300 mm intervals.
• For best results always work with the canister in a vertical position and keep the valve pointed downwards.
• Move the panel into place and press firmly to ensure a good contact. Hold in position for 2-3 minutes, heavier panels may require additional support during curing.
• Shake the canister thoroughly for at least 20 times. Remove the protective lid and screw onto the PU foam gun.
• For internal applications: Starting at the middle of the panel, apply a bead of Tiger Easy Bond across the full width of the board or panel and repeat every 300 mm.
• For external applications (EIFS): Apply a bead of Tiger Easy Bond around the perimeter of the surface to be bonded. Then across the full width of the board or panel at 300 mm intervals.
• For best results always work with the canister in a vertical position and keep the valve pointed downwards.
• Move the panel into place and press firmly to ensure a good contact. Hold in position for 2-3 minutes, heavier panels may require additional support during curing.